EPA REG. NO. 6836-152-91579   EPA EST. NO. 1459-PA-01

Use ANTI 3 Protect Series Disinfectant Deodorizing  Equipment Spray to clean and disinfect nonporous surfaces of desks, chairs, tables, athletic equipment, vinyl, and plastic upholstery, metal, plastic, bathroom fixtures, showers, shower stalls, sinks, and glazed tiles. Precaution: Cleaning at 120ºF temperature will avoid overheating and distortion of the personal safety equipment that would necessitate replacement. Use this product to clean and disinfect nonporous athletic mats, wrestling mats, gymnastic mats, exercise equipment, and training tables. This product is a  mildew stat and will effectively inhibit the growth of mold and mildew and the odors caused by them when applied to hard nonporous surfaces.

DIRECTIONS FOR USE

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

DISINFECTION / VIRUCIDAL* / FUNGICIDAL / MOLD & MILDEW CONTROL DIRECTIONS:

Apply this product undiluted to hard, nonporous surfaces, thoroughly wetting the surfaces with a cloth, mop, sponge, sprayer or by immersion. Treated surfaces must remain wet for 10 minutes.

For Influenza Virus Type A and Human Coronavirus, treated surfaces must remain wet for 1 minute. Wipe dry with a cloth, sponge or mop or allow to air dry. For heavily soiled areas, a preliminary cleaning is recommended. Spray 6-8 inches from the surface, until the surface is thoroughly wet. Do not breathe spray. Let stand 10 minutes. Wipe dry with a clean cloth or sponge or allow to air dry. For heavily soiled areas, a pre-cleaning is required.  Rinse all surfaces that come in contact with food such as countertops, appliances, tables, and stovetops with potable water before reuse. Do not use on utensils, glassware, and dishes. For fungicidal activity: ANTI 3 Protect Series Disinfectant Deodorizing Equipment Spray is an effective one-step fungicide against Trichophyton mentagrophytes when used on hard nonporous surfaces in areas such as locker rooms, dressing rooms, shower and bath areas, and exercise facilities. Allow the surface to remain wet for 10 minutes.

For mold and mildew: Repeat treatment every 7 days or more often if new growth appears.

This product is not for use on medical device surfaces.

Active Ingredients: 

Quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides (CAS #68424-85-1). Octyl decyl dimethyl ammonium chloride ……… 0.025%
Dioctyl dimethyl ammonium chloride …………… 0.010%
Didecyl dimethyl ammonium chloride ………….. 0.015%
Alkyl (C14, 50%; C12, 40%; C16, 10%)
dimethyl benzyl ammonium chloride …. 0.034%
Other Ingredients: …………………………….. 99.916%
Total: …………………………………………….. 100.000%